High Accuracy Wind Speed Anemometer with 2.62ft Cable for Greenhouse Monitoring Sensor and

1. [LIGHTWEIGHT AND EASY TO CARRY] Equipped with strong resistance against and interference, this anemometer is compact and portable, perfect for on-the-go wind monitoring. 2. [ACCURATE AND RELIABLE] High accuracy wind speed sensor with 2.62ft extension cable for precise measurements in various environments. 3. [VERSATILE WIRING OPTIONS] Compatible with both bottom and side wiring for easy installation and adaptability to different setups. 4. [DURABLE MATERIAL] Made from - ABS material, the wind cups ensure longevity and high strength even in harsh conditions. 5. [WIDE APPLICATION] Suitable for use in greenhouses, ships, meteorological stations, airports, and more for accurate wind speed readings. Spec: Item Type: Wind Speed Anemometer Material: ABS Size: Approx. 158x180x70mm/6.22x7.09x2.76in Power Supply Voltage: DC5V Signal Output: 0-2.5V Measurement Range: Wind Speed 0-45m/s Connection Extension Cable Length: Approx. 0.8m/31.50in Accuracy: ±(0.5+0.02V)m/s Resolution: 0.1m/s Start up Wind Speed: ≤0.8m/s Maximum Power Consumption: 0.48W Load Capacity: DC12V power supply, current output impedance ≤350Ω, DC24V power supply, current output impedance ≤900Ω, voltage output impedance ≥1KΩ Operating Environment: Temperature -35°C to 60°C, humidity ≤100%RH without condensation Protection Level: IP64 Application: Greenhouse, , Meteorological Station, Ship, Pier, Farming, Advertising Gate, Meteorology, Marine, Environmental, Airport, Port, Laboratory, and Traffic wind speed measurement environments Calculation Formula: 0-2.5V:F=V/2.5*A+B F: Wind speed value, m/s; V: Sensor output voltage, V; A: Sensor range width (upper range minus lower limit); B: The lowest value of the sensor range (the lower limit of the range); Wiring Method (wire color output signal): Red-Positive, Black-Negative, Yellow-Signal Diameter: Approx. 63mm/2.48in Mounting Hole Diameter: Approx. 3.2mm/0.13in Mounting Depth: Approx. 15mm/0.59in (recommend reserving 25mm for wiring, wire first, then install fixed sensor) Troubleshooting: 1. The wind Vane/Wing does not rotate smoothly, the delay is large. Due to foreign objects or jamming in the bearing after long term use. Please return the sensor to the company for processing; 2. The display value is incorrect. It may be caused by wiring problems or communication interface failures that prevent correct data retrieval. Please check if the wiring is correct and secure, if the interface is occupied, and if the interface settings are correct. How to Use: 1. Make sure the mounting bracket is parallel to the ground 2. Using M3 screws and nuts, fix the sensor on the mounting bracket through the 4 mounting holes on the sensor 3. Through the reserved M23 route hole, connect the aviation plug joint with the navigation socket of the sensor 4. Please avoid disassembling the sensor during installation(Screws and nuts are not included) PackageList: 1 x Wind Speed Anemometer Notice: 1. Please check whether the packaging is in good condition, and check whether the product model is consistent with the selection; 2. Do not live wiring, and the power can only be turned on after the wiring is completed and checked; 3. The length of the sensor line will affect the output signal of the product, do not change the product at will when using, if there is a need to change, please contact the manufacturer; 4. The sensor is a precision device, please do not disassemble or touch the surface of the sensor with objects or corrosive liquids when using it, so as not to damage the product; 5. Please keep the verification certificate and certificate, and return it with the product during maintenance. 6. Do not plug and unplug with electricity connected;

• [LIGHTWEIGHT AND EASY TO CARRY] Equipped with strong resistance against and interference, this anemometer is compact and portable, perfect for on-the-go wind monitoring.
• [ACCURATE AND RELIABLE] High accuracy wind speed sensor with 2.62ft extension cable for precise measurements in various environments.
• [VERSATILE WIRING OPTIONS] Compatible with both bottom and side wiring for easy installation and adaptability to different setups.
• [DURABLE MATERIAL] Made from - ABS material, the wind cups ensure longevity and high strength even in harsh conditions.
• [WIDE APPLICATION] Suitable for use in greenhouses, ships, meteorological stations, airports, and more for accurate wind speed readings.